info@get-halp.com

IP-E4010 IP POE Horn Speaker

IP-E4010 IP POE Horn Speaker

The Arvox IP‑E4010 IP PoE Horn Speaker combines rugged durability, IP-based audio streaming, and PoE convenience in a powerful 25–30 W unit. It’s a perfect fit for scalable, low-infrastructure outdoor paging and notification systems.

Category:

Design & Build Quality

  • Rugged ABS housing with iron mesh grille, rated IP55 for dust and water resistance—ideal for outdoor installations.

  • Neatly integrates a digital audio decoder and active treble horn into a weather-resistant, wall-mounted enclosure.

Key Advantages

  • All-in-one IP speaker: decodes digital audio, amplifies signal, and powers itself via PoE.

  • PoE simplifies deployment—no separate power run needed.

  • Rugged, IP55-rated build ensures reliable outdoor performance.

  • Emergency or automation-ready with linkage output integration.

  • Supports multicast and IP streaming, enabling scalable PA system deployment.

Considerations

  • Limited to 25 W output on PoE, with slightly higher output using DC power.

  • No analog input; requires integration with IP PA systems/controllers.

  • Wall-mounted only—secure mounting bracket needed for outdoor use.

Ideal Applications

  • Outdoor paging in parking lots, campus grounds, factories, and warehouses.

  • Emergency alerting in public spaces like parks, transit zones, shipyards.

  • IP-based PA systems with ease-of-installation for distributed horn speaker deployment.

Item NO. IP-E4010
Network interface Standard RJ45
Support agreements RTP, UDP, TCP/IP, FTP
Audio format MP3/WAV
Sample rate 8K to 48KHz
Network transmission rate 100Mbps
Audio mode 16-bit stereo CD sound quality
The horn unit specification 5.25″
Output frequency 80Hz to 16KHz
Harmonic distortion ≤1%
The signal-to-noise ratio ≥80dB
Rated power 25W (when POE is powered)
The ambient temperature -20°C to 70°C
Ambient humidity 20% to 80% relative humidity
Power consumption 24W
Input power supply POE/DC12V
Installation form Wall-mounted
Material ABS material
The size of the product 215 x 170 x 150 mm
Weight 2.3kg

* ABS housing, iron mesh cover, waterproof and dust-proof grade in accordance with IP55 standard design, digital decoding terminal and active treble horn integration;
* The equipment is designed with embedded computer technology and DSP audio processing technology.
* Built-in 1 network hardware audio decoding module, support TCP/IP, UDP, IGMP (multicast) protocol; Support international standard IEEE 802.3at protocol
* Built-in Class D 30W amplifier circuit, fine sound quality, strong power;
* When equipped with POE-powered POE switch, only one network cable is required to connect, the construction is simple and the cost is low;
* POE switch supply power up to 25W, if using ordinary switch, then the external DC12V power adapter power up to 30W;
* With a one-way linkage output interface (short-circuit signal), easy to extend with other systems;
* Support DHCP, compatible with routers, switches, bridge gateways, the Internet, multicast, unicast and other arbitrary network structures;
* Built-in network isolation lightning treatment circuit

Related products