IP-E1010 5.25″ IP POE Ceiling Speaker

The Arvox IP‑E1010 is a compact, ceiling-mounted IP speaker with built-in DSP, Class‑D amplification, and PoE/DC power flexibility—ideal for functional, scalable IP PA systems. Ready for use in modern networked environments with multicast/unicast setup.

Category:

Description & Design

  • Compact ceiling-mount speaker with 5.25″ coaxial horn driver in a sleek ABS flame-retardant enclosure and metal grille

  • Integrated network audio decoder with embedded DSP ensures superior audio quality and digital signal processing

Power & Networking

  • PoE-powered: provides 10 W audio output via standard PoE (≤ 10 W budget); it can also accept 12 V DC for up to 20 W output

  • Single network cable setup simplifies installation with support for DHCP, multicast/unicast, FTP, TCP/IP, UDP, IGMP protocols

  • Built-in lightning protection and network isolation improves reliability

Item NO. IP-E1010
Network interface Standard RJ45
Support agreements RTP, UDP, TCP/IP, FTP
Audio format MP3/WAV
Sample rate 8K to 48KHz
Network transmission rate 100Mbps
Audio mode 16-bit stereo CD sound quality
The horn unit specification 5.25″
Output frequency 80Hz to 16KHz
Harmonic distortion ≤1%
The signal-to-noise ratio ≥80dB
Rated power 10W (when POE is powered)
The ambient temperature -20°C to 70°C
Ambient humidity 20% to 80% relative humidity
Power consumption 24W
Input power supply POE/DC12V
Installation form Ceiling type
Material ABS flame retardant material
Cutout Size Dia175mm
The size of the product Dia194 x 131mm
Weight 1.25kg

* ABS flame retardant housing, iron mesh cover, one-way receiving terminal, digital decoding terminal and active smallpox horn in one;
* The equipment is designed with embedded computer technology and DSP audio processing technology.
* Built-in 1 network hardware audio decoding module, support TCP/IP, UDP, IGMP (multicast) protocol;
* Built-in Class D 20W amplifier circuit, fine sound quality, strong power;
* 5.25 inch horn unit, full band coverage, clear sound quality bright and pleasant;
* When equipped with POE-powered POE switch, only one network cable is required to connect, the construction is simple and the cost is low;
* POE switch supply power up to 10W, if using ordinary switch, then the external DC12V power adapter power up to 20W;
* With a one-way linkage output interface (short-circuit signal), easy to extend with other systems;
* Support DHCP, compatible with routers, switches, bridge gateways, the Internet, multicast, unicast and other arbitrary network structures;
* Built-in network isolation lightning treatment circuit